Send me DOGECOIN !!!! DJvHercDWe9HS39wtyij6XvPDqbVoZ9ei5
I wanted to print a doge coin amidst the doge coin hype and didn't like any of the coins on thingiverse .. so i made my own.
have fun ,
If you are using a resin printer use the 60mm files
if you are using a filament printer use the 120mm files
the 120mm files should work better for 0.4mm nozzles although i haven't tested it myself as i just have a resin printer.
I would also recommend printing the coin in 2 halves.
EDIT: As requested i added some dashes to the D on the back of the coin i personally like the small dash but there is a big dash because looking up the doge coin logo online i found a few so you have a choice of three . ENJOY
| Doge_coin_120mm_1st_half.stl | 396.7KB | |
| Doge_coin_120mm_2nd_half.stl | 21.9MB | |
| Doge_coin_120mm_full_coin_.stl | 22.2MB | |
| Doge_coin_60mm_1st_half.stl | 265.8KB | |
| Doge_coin_60mm_2nd_half.stl | 24.9MB | |
| Doge_coin_60mm_full_coin_.stl | 25.1MB | |
| EDIT_Doge_coin_120mm_Big_dash_1st_half.stl | 263.2KB | |
| EDIT_Doge_coin_120mm_Big_dash_full_coin_.stl | 25.1MB | |
| EDIT_Doge_coin_120mm_Small_dash_1st_half.stl | 272.7KB | |
| EDIT_Doge_coin_120mm_Small_dash_full_coin_.stl | 25.4MB | |
| EDIT_Doge_coin_60mm_big_dash_1st_half.stl | 263.2KB | |
| EDIT_Doge_coin_60mm_big_dash_full_coin_.stl | 25.1MB | |
| EDIT_Doge_coin_60mm_small_dash_full_coin_.stl | 25.5MB | |
| EDIT_Doge_coin_60mm__small_dash_1st_half.stl | 272.7KB |
