Dog Door Holder Brackets 3D Printer Model
The file 'Dog Door Holder Brackets 3D Printer Model' is (scad,stl) file type, size is 24.5KB.
The file 'Dog Door Holder Brackets 3D Printer Model' is (scad,stl) file type, size is 24.5KB.
Bracket to hold the dog door cover above the dog door when not in use.
This attached to the vertical surface and the dog door cover slides right in between the brackets. I have a bracket on the right and left and one at the bottom.
Due to the curves in the door I had to use a different bracket on the bottom. At first I made a complex shape that curved along the contour (see 45 degree bracket) but I couldn't screw the bracket in because the wood is too thin at the point that it connects. Instead I made a simple flat bracket for the bottom.
Feel free to download and modify. Let me know if you have any suggestions for improvement.
| dog_door_bracket.scad | 831.0B | |
| dog_door_bracket.stl | 90.9KB | |
| dog_door_bracket_flat.scad | 1.5KB | |
| dog_door_bracket_flat.stl | 79.2KB | |
| dog_door_bracket_long_45degree.scad | 1.5KB | |
| dog_door_bracket_long_45degree.stl | 105.6KB |
