I closed up the bottom and added a coin slot.
The slot is 26X2mm's so it's a tight fit for a US quarter.
https://youtu.be/opPklpVnDKA?si=lZ0gMDxZXkLfWqPj
Printed in PLA.
.2 layer 25% infill
R1: I made a revision.
I suddenly realized that I didn't have to close up a hole before I add a slot so I removed the circle and left the slot.
six one half dozen or the other lol
| open-slot.stl | 215.3KB | |
| piggy_bank.stl | 214.8KB |
