Dodecahderon Candle Mould 3D Printer Model
The file 'Dodecahderon Candle Mould 3D Printer Model' is (stl) file type, size is 4.8KB.
The file 'Dodecahderon Candle Mould 3D Printer Model' is (stl) file type, size is 4.8KB.
This is a mould for a dodecahedron candle.
NOTE* REQUIRES ROTATING BEFORE PRINTNG
I printed the two parts together with 5 walls and 0% infill.
The model was designed without a wick hole, with the intention to drill to size after..
NOTE* if you print this with less than 100% infill the base will have an area for wax to enter inside the body of he mould... As I did, meaning some wax was wasted 'priming' the mould (as the entire base filled itself with wax). Since then it has been re-used and works well.
Creating a hole with software would be reccomended, allowing the slicer to create a walled section.
Used a long thin blue tack sausage to create a seal between the parts before pouring.
*Making and pouring boiling wax can be dangerous - Please take care! :)
| base.stl | 3.6KB | |
| dodecahedron.stl | 8.9KB | |
| mold.stl | 7.3KB | |
| top.stl | 3.8KB |
