Document Camera Mount (phone Mount) 3D Printer Model
The file 'Document Camera Mount (phone Mount) 3D Printer Model' is (stl,STL) file type, size is 4.9MB.
The file 'Document Camera Mount (phone Mount) 3D Printer Model' is (stl,STL) file type, size is 4.9MB.
My wife is a teacher and has recently been challenged with the task of teaching 9th grade Science from home due to Covid-19. I made this "thing" to provide her a way to record herself working through a worksheet. The recording will later be shared with her students. I hope others can make use of this during and beyond Covid-19. The 3d printed parts are all that are required, so no need to go to the hardware store.
*Notes supports are only needed on the male arms and the tongs. You could print the male arms without supports by rotating them, but I would not recommend this as it will weaken the threads.
*Each mobile device is a little different. You will need to choose the correct screw for your device. The screw_54mm.stl works with iphone models similar to iPhone 8
| arm-female-100.stl | 1.1MB | |
| arm-female-140.stl | 1.1MB | |
| arm-female-200.stl | 1.1MB | |
| arm-male-100.stl | 693.9KB | |
| arm-male-140.stl | 649.7KB | |
| arm-male-200.stl | 567.5KB | |
| arm-mixed-100.stl | 932.6KB | |
| arm-mixed-140.stl | 897.5KB | |
| arm-mixed-200.stl | 853.0KB | |
| Bracket.stl | 380.4KB | |
| button_cap.stl | 188.0KB | |
| clamp.stl | 385.3KB | |
| clamp_bolt.stl | 590.2KB | |
| clamp_cap.stl | 404.7KB | |
| clip.stl | 623.7KB | |
| double_lamp_holder.stl | 790.4KB | |
| knob.stl | 319.8KB | |
| lamp_cap.stl | 59.7KB | |
| lamp_holder.stl | 696.4KB | |
| screw.stl | 172.7KB | |
| Screw_54mm.stl | 97.4KB | |
| SCREW_LONGER.stl | 272.3KB | |
| SCREW_Medium.stl | 153.3KB | |
| TONGS.STL | 281.9KB | |
| tube_mount.stl | 158.2KB | |
| wall_joint.stl | 625.2KB | |
| wall_mount.stl | 166.1KB | |
| wire_holder.stl | 63.9KB |
