This is a remix of 4MULE8's excellently modeled Doctor Doom mask. The only alteration is that I have cut holes through the mask where the rivets were.

Why remix?

I had no issues with the original mask, with the sole exception of the rivets. Whilst they look good (placement and size are good, etc) they didn't look quite good enough for my liking. The problem being that they had no underside, which made them look like they were part of the same piece of material as the rest of the mask (in part because they were).

My solution was to cut holes through the mask where the rivets were, and insert stationary split-pins through the holes during the build stage of production. This lent the mask that bit more finesse and, in my opinion, really enhanced the look of the finished product.

You can see the type of split-pin I used in one of the photos above.

Due to the size of my print bed, I had to print the mask in quarters (props to 4MULE8 for providing many print options). This remix includes 2 of those quarters (top-left and bottom-left) which can be mirrored in your slicer to print all 4 pieces. As I only needed the pieces provided, I only remixed the pieces provided.

Print Settings

The print settings I have provided were the ones I ended up using and are what I consider the most reliable from my experience. I had bed adhesion issues with the piece, hence the raft suggestion. Your mileage may vary, of course.

Please enjoy, and good luck!

Addendum

If anyone can tell me why the photos all came out landscape rather than portrait (their original orientation) and how I can fix it, that would be appreciated!