Docking Station For Phone, Wallet, Keys, Etc. Help Yourself Stay Organized! 3D Printer Model
The file 'Docking Station For Phone, Wallet, Keys, Etc. Help Yourself Stay Organized! 3D Printer Model' is (stl) file type, size is 521.1KB.
The file 'Docking Station For Phone, Wallet, Keys, Etc. Help Yourself Stay Organized! 3D Printer Model' is (stl) file type, size is 521.1KB.
Please read!
Before printing the 3 "station" files, I recommend you print the "test" files with the same settings you'll use for the rest of the docking station. This will help determine if the settings used allow for a decent fit between the wall and base of the docking station. It's better to have a loose fit than a tight fit, you can always use super glue!
A simple docking station to help keep track of the items you use every day. Your phone, wallet, keys, glasses, mask, watch, and anything else you can think of! There's also a hole at the bottom of the phone base, allowing you to run a charging cable to your phone.
The docking station is 230mm long, 150mm wide, and 190mm tall.
The files may have to be rotated to fit within the print area. Unfortunately, I had to decrease the original length of the docking station to get it to fit in my Ender 3's print area.
Any feedback is much appreciated!!
(Please ignore the warp on the phone stand in the pictures. Turns out, printing in a super cold room will do that.)
| female_test_fit.stl | 2.2KB | |
| male_test_fit.stl | 1.4KB | |
| station_base.stl | 324.3KB | |
| station_phone_stand.stl | 140.9KB | |
| station_wall.stl | 905.0KB |
