DnD Mini Risers For Flying And/or Underwater Combat Version 2 3D Printer Model
The file 'DnD Mini Risers For Flying And/or Underwater Combat Version 2 3D Printer Model' is (stl) file type, size is 116.1KB.
The file 'DnD Mini Risers For Flying And/or Underwater Combat Version 2 3D Printer Model' is (stl) file type, size is 116.1KB.
Updated from the origonal version after printing. I found the origonals worked, and were ok but they were a little flimsy so I added a support beam, I still tried to keep the underneath free so a mini can be there too.
Very Simple DnD Mini Risers, they are 1" in footprint both at the top and bottom. I would reccomend using sticky tack or other removeable adhesive for minis bigger than 1" bases! Numbers added for easy visual reference.
EDIT: Finally got this printed and they are thicker and the support beam makes them MUCH more stable than the origonal version! If i remake them one thing I would do is swab the side of the support beam becuase I (brilliantly!) put the support beam over the side with the number you're supposed to read from the front. Other than that these are great! Do be aware that without a mini they may stand a little unsteady but the extra top weight helps them GREATLY with their stability!
| Mini_Risers_V2_2.stl | 34.8KB | |
| Mini_Risers_V2_3.stl | 38.6KB | |
| Mini_Risers_V2_4.stl | 28.5KB | |
| Mini_Risers_V2_5.stl | 37.0KB | |
| Mini_Risers_V2_6.stl | 35.4KB | |
| Mini_Risers_V2_7.stl | 27.4KB | |
| Mini_Risers_V2_8.stl | 38.9KB | |
| Mini_Risers_V2_single_set.stl | 240.5KB |
