Disclaimer: I painted the one in the 2nd and 3rd picture with spray paint, so if u see some non homogeneus color or that some letters look odd is cause of that, the one in the first picture isn't painted instead
So I found that I often loose my dices when DMing under books, sheet of papers etc, so I decided to make this to have at least a place for 1 set
Decided to engrave wich dice to make it easier as I'm a newbie with these dices
I USED HOMEMADE DICES FOR THE MEASUREMENTS, HERE ARE THE SIDE MEASURES OF MY DICES
d4 - 25mm
d6 - 18mm
d8 - 22mm
d10/d100 - long side 18mm, short side 8mm
d12 - 9mm
d20 - 14mm
I INCREASED THESE DIMENSIONS BY 0.8mm TO MAKE IT MORE LIKE A HOLDER AND NOT A FIT
The holes are 6mm deep, the engraving is 0.5mm deep
Have fun, and good rolling
P.s. if you have any suggestion I'm open to them, also first time posting something, so tell me if I should add something
| Dice_Tray.STL | 603.4KB |
