DN110 Ball Valve Blast Gate For Workshop 3D Printer Model
The file 'DN110 Ball Valve Blast Gate For Workshop 3D Printer Model' is (STL) file type, size is 3.7MB.
The file 'DN110 Ball Valve Blast Gate For Workshop 3D Printer Model' is (STL) file type, size is 3.7MB.
Made a remix of PeterH1500´s ball valve for european standard DN110 tubes.
Use two M4 threaded inserts and put them in the holes on the side of the ball for fixation of the handle and bearing. i used one M4x20 and one M4x25 screw.
the screws for the body are M4x14
| DN110_gate_ball.STL | 2.2MB | |
| DN110_gate_bearing.STL | 102.0KB | |
| DN110_gate_handle.STL | 145.5KB | |
| DN110_gate_tube1.STL | 3.2MB | |
| DN110_gate_tube2.STL | 5.4MB |
