DLG Carrier 3D Printer Model
The file 'DLG Carrier 3D Printer Model' is (stl) file type, size is 201.1KB.
The file 'DLG Carrier 3D Printer Model' is (stl) file type, size is 201.1KB.
DLG Carrier
This is an F3K stand designed to carry F3K glider from the pit to the model box.
If you are a contest F3K pilot, have you ever felt that you don't have enough hands to carry your gliders and its TX to the field?
Carrying two gliders with one hand can damage the tail fins, and on windy days the glider in the model box can be blown away.
To solve this problem this portable stand was developed. The stand can be secured with pegs. Also, this stand can be folded up small. The thickness is only 3 cm after disassembling, you can make it compact for air travel very easily.
What you need
12.7mm (Thickness less than 2mm) neodymium magnets x 4
Sponge tape 15mm x 5 x 350mm x 4
| DLG-CR-Arm1.stl | 59.8KB | |
| DLG-CR-Arm2.stl | 83.9KB | |
| DLG-CR-Body_L.stl | 291.1KB | |
| DLG-CR-Body_R.stl | 291.1KB |
