If you don't know about the radio station DKFM you do now!!
https://decayfm.com
I am a really big fan of the station and I wanted to make their logo 3d.
I uploaded a few of the resulting stl for you. Keep in mind that the barrier between the base and the cutout is only .25 for these renderings. You will have to adjust these depending on your printer resolution.
Also if you are not listen to DKFM while printing these they will not come out well.....:)
I tried to consolidate the files into one for the customizer but it ran out of memory while processing. I added the file anyway just for kicks.
For those of you who have OpenScad
I broke the file up into a ton of modules isolating the heart and the guitar.
You have modules for just the bases added to the guitar curved and not curved.
You have modules that have the just the heart, a full heart and a cutout heart.
You should be able to reuse any of these modules in any project.
The important part of the scad file is the variable called "guitarOffset".
This is the space between the heart cut out and the guitar base. you will almost definitely need to updated this on your needs.
Warning!!
If you Z access is wavy at ALL, these parts will NOT fit together. I have already tried it with a sub-par printer and they will just not go together without post processing
| DKFM.BaseGuitar.stl | 73.4KB | |
| DKFM.complete.Customiser.scad | 2.5MB | |
| DKFM.complete.scad | 2.8KB | |
| DKFM.CurvedGuitar.stl | 504.6KB | |
| DKFMHeartCutOut.stl | 1.9MB | |
| DMFM.HeartPart.stl | 4.2MB | |
| Guitar.scad | 2.0KB | |
| guitar.svg | 4.6KB | |
| Heart.SCAD | 2.5MB |
