DJI URUVA Analog Adaptor Top Mount 3D Printer Model
The file 'DJI URUVA Analog Adaptor Top Mount 3D Printer Model' is (stl) file type, size is 519.2KB.
The file 'DJI URUVA Analog Adaptor Top Mount 3D Printer Model' is (stl) file type, size is 519.2KB.
I wanted to move the analog adaptor from the side of the goggles to the top.
well if you are using a 2 point strap then you have a extra attachment point on top. this adaptor makes it so you can mount the analog adaptor to that point.
I printed it out of PLA and used a couple 2mm screws to mount it but I believe the stock screws that come with the adaptor will work as well.
| analog_adaptor_top_mount.stl | 1.1MB |
