The file 'DJI RC-N1 Remote Shade Mini 2 / Mini 3 Pro / Air 2S / Mavic Air 2 With IMPROVED Hinges 3D Printer Model' is (SLDASM,SLDPRT,STL) file type, size is 1.0MB.
Just another shade for DJI RC-N1 Remote that comes with Mini 2, Mini 3 Pro (not the RC Pro Smart Remote one), Mavic Air 2, Air 2S. Folds up and fits into original DJI bag with Mini 2
This is a remix from user 'ACDanyC82', but built from ground up in SolidWORKS with different hinges as I had problems there.
Tested with iPhone 7 Plus (+skin cover cca.160mm overall), but can be made larger as SW model is parametric. Write me in the comment and hopefully I will see it.
EDIT: Center part .stl of lenght 175mm added to original 160mm one.
Only supports I needed were under the handles/forks (that holds around the Ring) on Center part. Holes were printed without supports, as they are only 2mm and support will clog them up.
If printer clogs 2mm holes up during the printing, you can heat up the needle with a lighter and fix it. Hold the needle with tweezers ofc.
Print time at 0,2mm layer with Prusa Mini+ is around 4-5h.
NOTE: Hinges need a few centimeters of 1,75mm filament, chopped on 4 pieces.
| Assembly.SLDASM | 100.2KB | |
| Center.SLDPRT | 135.3KB | |
| Center.STL | 588.2KB | |
| Center_175mm.SLDPRT | 127.5KB | |
| Center_175mm.STL | 781.9KB | |
| Flap_LHS.SLDPRT | 86.5KB | |
| Flap_LHS.STL | 261.8KB | |
| Flap_RHS.SLDPRT | 106.8KB | |
| Flap_RHS.STL | 297.3KB | |
| Ring.STL | 412.7KB |
