DJI O3 With BN-220 Back Mount And Side Guards 3D Printer Model

Author: @
License: CC BY-SA
File formats: stl
Download type: zip
Size:100.7KB

The file 'DJI O3 With BN-220 Back Mount And Side Guards 3D Printer Model' is (stl) file type, size is 100.7KB.

Summary

DJI O3 Air Unit with BN-220 GPS holder

I used these designs as a base:

I have edited the holder from Tom to add support and combine it with scratch83's protection mount. Below are the changes I made:

Modifications

  • Antenna small holes removed: Not needed for my design.
  • Antenna fixer: I designed an antenna fixer to hold the antenna tightly in place. It fits perfectly on my calibrated printer.
  • Larger mount holes: The holes where the mount attaches to the drone were enlarged to 6.5 mm.
  • GPS mount tool hole: Added a small hole under the GPS mount to use a tool for removing the GPS if it gets stuck.

Final Specifications

  • Total height: 25 mm
bn-220-o3-air-atenna-fixer.stl 33.9KB
bn-220-o3-air-atenna-long-legs.stl 84.8KB
bn-220-o3-air-atenna-short-legs.stl 62.3KB
bottom_left.stl 85.3KB
bottom_right.stl 85.3KB