My new project https://www.thingiverse.com/thing:2839591
This is a remix of http://www.thingiverse.com/thing:2078849. I collected some changes in this build.
https://www.tinkercad.com/things/0fkdeN7Lsel-dji-mavic-remix-of-cdrskull-edition-httpdiyrccouk
https://www.tinkercad.com/things/gsOqpUEHPxC-dji-mavic-gimbal
2018/01/20
-- Plunger tube added, 8mm outher size 6mm inner size for bigger Mavic Model.
2017/10/06
-- Redesign Front_Top part, give a little space for the GPS top.
2017/05/28
-- Redesign Nose part. I put Naza v2 FC and GPS inside it.
-- Resdesign arms to fit Emax MT3110. I put 25mm_19mm holes to the arms.
2017/05/14
-- Scaled all parts with 134.35% size. Emax MT3110 or Sunnysky V35xx series motors will fit to model. I can use 10,11 or 12 inch propellers.
-- Rear arm and base model files are different. (Thks to CLTECH & Musa). Modified rear arms to hide screw head.
-- Top Back part modified. I trim the inside to fit 4S 5000mah lipo battery.
-- Base part modified to hide screws on bottom side.
-- Emax MT3110 motors with 11x47 foldable props (Later i will try 12x38 props)
-- Hobbywing XRotor 40A Esc
-- DJI Naza v2
-- Multistar 4S 5200 mah lipo
| Base.stl | 446.6KB | |
| Battery_Holder.stl | 69.5KB | |
| Catch.stl | 12.4KB | |
| DJI_Mavic_All.stl | 2.1MB | |
| Fake_Sonar.stl | 53.0KB | |
| Front_Arm_Left.stl | 175.2KB | |
| Front_Arm_Left_25mm_19mm_Holes.stl | 245.5KB | |
| Front_Arm_Right.stl | 174.7KB | |
| Front_Arm_Right_25mm_19mm_Holes.stl | 238.2KB | |
| Front_Left_Leg.stl | 32.1KB | |
| Front_Right_Leg.stl | 31.3KB | |
| Front_Top.stl | 133.6KB | |
| Middle.stl | 180.6KB | |
| Nose.stl | 163.6KB | |
| Nose_Naza_v2___GPS_Top.stl | 138.6KB | |
| Nose_Naza_v2___GPS__Bottom.stl | 27.0KB | |
| PlungerTube8mm_outher6mm_inner_for_bigger_size_model.stl | 19.2KB | |
| Plunger_Housing.stl | 19.2KB | |
| Rear_Arm_Left_.stl | 174.3KB | |
| Rear_Arm_Left_25mm_19mm_Holes.stl | 219.2KB | |
| Rear_Arm_Right.stl | 177.2KB | |
| Rear_Arm_Right_25mm_19mm_Holes.stl | 195.7KB | |
| Rear_Leg.stl | 38.1KB | |
| Rear_Top.stl | 92.3KB | |
| Sonar_cover.stl | 40.2KB | |
| Sonar_holder.stl | 18.2KB | |
| Under_Base_Front_Leg.stl | 11.8KB |
