DJI Mavic Air 2 Controller Remote Rig IPad Pro (2020) 12.9 Inch Magnetic 3D Printer Model
The file 'DJI Mavic Air 2 Controller Remote Rig IPad Pro (2020) 12.9 Inch Magnetic 3D Printer Model' is (zip,STL) file type, size is 14.5MB.
The file 'DJI Mavic Air 2 Controller Remote Rig IPad Pro (2020) 12.9 Inch Magnetic 3D Printer Model' is (zip,STL) file type, size is 14.5MB.
This is a rig for the remote control of the DJI Mavic Air 2 with a magnetic frame for the 2020 iPad pro 12.9.
The rig is clamped onto the controller and secured by 4 M4 bolts and nuts. There are 4 nuts M4 printed into either part to be able to attach something. On top you will fasten the assembly to hold the iPad. The frame itself is made of two parts to be printable on a regular sized bed of an Ender 3 (235x235mm), but it actually needs less space. There are 4 spaces left for glueing in the magnets. I used round magnets 8x4mm in size. In every hole there will fit two of them. You have to take care of the right orientation of the magnets! Try it out on the iPad before glueing them in place. On pair of magnets will be side by side with opposite orientation.
There are holes for attaching melt-in threads on either side of the frame. You will need to drill them open to the right size, I used 5,5mm for M4 threads. Lateron I will design a glare shield for the assambly to attach to these threads.
Weight is about 1400 grams including the 600 gram iPad. So the parts are about 300 grams in total. I printed them from Formfutura Carbonfil which worked very great. So all parts are designed for a layer height of 0,24mm and 0,6mm nozzle and line width.
I uploaded the assembly for Solidworks 2018 in the controller.zip file. I can upload the models in other filetypes upon request.
No commercial distribution!
Have a lot of fun with your UAV!
| Controller.zip | 6.9MB | |
| handle_M8.STL | 3.4MB | |
| MA2_Adapter_Controller.STL | 2.0MB | |
| MA2_Adapter_iPad.STL | 3.4MB | |
| MA2_Antenna_Locker.STL | 4.7MB | |
| MA2_Controller_Rig_bottom.STL | 1.1MB | |
| MA2_Controller_Rig_top.STL | 3.7MB | |
| MA2_iPad_Pro_129_Frame_left.STL | 1.5MB | |
| MA2_iPad_Pro_129_frame_right.STL | 1.5MB |
