This is my 3D printed Inspire clone. All the original STL files are here but full details on how to build including arduino code etc are at http://www.diyrc.co.uk . All my designs are free to use. If you would like to donate then that's up to you as not everyone can afford it. Watch a youtube video of it in action - https://youtu.be/u7R9DIlD400
| center_arduino_case_1.stl | 52.0KB | |
| center_back_battery_clamp_1.stl | 41.3KB | |
| center_back_battery_holder_1.stl | 142.1KB | |
| center_body_connector_1.stl | 89.0KB | |
| center_bottom_battery_plate1.stl | 172.7KB | |
| center_bottom_battery_spacer_plate1.stl | 60.2KB | |
| center_bottom_body_mount_1.stl | 87.2KB | |
| center_bottom_plate1.stl | 217.0KB | |
| center_canopy_top_1.stl | 475.8KB | |
| center_lower_back_1.stl | 197.4KB | |
| center_lower_front1.stl | 52.0KB | |
| center_top_battery_plate_1.stl | 70.2KB | |
| center_top_battery_XT_clamp_1.stl | 32.8KB | |
| center_top_plate1.stl | 241.2KB | |
| gps_canopy_mount_1.stl | 60.8KB | |
| inner_leg_housing_2.stl | 401.8KB | |
| inner_leg_housing_mirror_2.stl | 401.8KB | |
| leg_link_2.stl | 66.7KB | |
| leg_mover_plate_1.stl | 107.3KB | |
| motor_housing_bottom_4.stl | 199.8KB | |
| motor_housing_top_4.stl | 100.9KB | |
| outer_leg_foot_4.stl | 89.7KB | |
| Outer_Leg_housing_2.stl | 266.4KB | |
| Outer_Leg_housing_mirror_2.stl | 266.4KB | |
| Outer_leg_link_1.stl | 58.7KB | |
| Outer_leg_link_mirror_1.stl | 58.7KB |
![The Sanchez [3 Inch Toothpick Style] 3D Printer Model](https://cdn.3axis.co/assets/c7/f7/d6/b2/c7f7d6b2-473b-43a0-9c56-57d9d5e73e83/images/32848c6c-e4e2-41ca-ad1f-04c2576f6d30_thumb.jpg)
![Project #MicroLongRange [3 Inch Version] 3D Printer Model](https://cdn.3axis.co/assets/bf/30/b7/87/bf30b787-94ea-4348-98aa-6e6cc2703c1d/images/d189d6dd-d9c1-422a-846a-31f67a893c70_thumb.jpg)
