DJI FPV Fly More Charger Frame 3D Printer Model
The file 'DJI FPV Fly More Charger Frame 3D Printer Model' is (stl) file type, size is 24.2KB.
The file 'DJI FPV Fly More Charger Frame 3D Printer Model' is (stl) file type, size is 24.2KB.
I was fed up with the fly more combo being this mess of unsecure cables with loose batteries barely connected by their cables. So I made this. Took hours of measuring and tweaking the design. Printed perfect on the first try :P Now set it up at the base of my drone bag with a cable coming out one side, nice and clean.
If anyone would like the tinkercad file let me know, I'd be happy to share it to you so you can more easily modify it if you like. Though you'll be just as well off to upload the STL to it to continue tweaking it.
I added an additional support to fill in a structural weak point under the power brick and cut channels for the battery clips to seat properly. Those were added after I printed it and noticed the issue. I haven't printed the final version cause it takes too long to print, and I just cut the channels manually in the one I had. The weak point was only really an issue cause it was a 1 layer spot on the print (you can imagine why that would be a problem) so I added a wedge shape. should work perfectly without supports now as long as you print it upright. ENJOY!
| DJI_FPV_Charger_Dock_Frame.stl | 103.1KB |
