netrecov deserves most merits for having done the hardest part which is reversing the shape of the original Dji Air arms.
By chance the shape of all 4 arms is similar, so I fine tuned one then I used symetry.
This design is made to be fast and efficient.
Using these legs will slightly change the sound of the drone, as for any accessory surrounding the propellers.
Note : When it comes to printing them, you need to chose either all 4 files named "40mm" or those named "60mm". Don't mix them, they already take into account the 20mm height difference between the front and the rear.
| dji_air_3_40mm_front_left_leg.stl | 163.1KB | |
| dji_air_3_40mm_front_right_leg.stl | 180.6KB | |
| dji_air_3_40mm_rear_left_leg.stl | 209.1KB | |
| dji_air_3_40mm_rear_right.stl | 226.4KB | |
| dji_air_3_60mm_front_left_leg.stl | 146.5KB | |
| dji_air_3_60mm_front_right_leg.stl | 163.3KB | |
| dji_air_3_60mm_rear_left_leg.stl | 179.1KB | |
| dji_air_3_60mm_rear_right.stl | 195.4KB | |
| Dji_Air_3_Legs_v4.f3d | 1.9MB |
