DJ Booth Music Box 3D Printer Model
The file 'DJ Booth Music Box 3D Printer Model' is (stl) file type, size is 495.2KB.
The file 'DJ Booth Music Box 3D Printer Model' is (stl) file type, size is 495.2KB.
This is a housing for the YunSheng 18 Note wind-up music box mechanism (https://www.amazon.sg/Pursuestar-YunSheng-Mechanism-Movement-Clockwork/dp/B0862C44G7/ref=sr_1_4?crid=5LTM1I8DP61K&keywords=Yunsheng+18&qid=1642995409&sprefix=yunsheng+18+%2Caps%2C230&sr=8-4) to make it look like a DJ booth.
The record will spin as the music plays; with other movable parts including the knob (rotates), pitch control (up & down), and needle (swivel).
Note: I have included all parts as 3D-printable models. However, I recommend using a snipped off piece of paper clip for the needle arm, and a thin bent metal sheet for the pitch control. I printed the gasket using Varioshore, but any flexible filament should work (alternatively, just cut out a bit of foam)
Hope you enjoy making this! Shoot me any questions in the comments section or via direct messages if you have any questions.
| Base.stl | 82.7KB | |
| Gasket.stl | 2.4KB | |
| Knob.stl | 453.2KB | |
| Leg_screw.stl | 69.4KB | |
| Leg_solid.stl | 1.4KB | |
| Lid.stl | 167.6KB | |
| Needle.stl | 163.2KB | |
| NeedleEnd.stl | 358.6KB | |
| NeedleHead.stl | 54.4KB | |
| NeedleHolder.stl | 500.7KB | |
| PitchSlider_1.stl | 79.4KB | |
| PitchSlider_2.stl | 684.0B | |
| RecordDisc.stl | 71.8KB |
