DIY SUITCASE PARTS 3D Printer Model
The file 'DIY SUITCASE PARTS 3D Printer Model' is (stl) file type, size is 3.2MB.
The file 'DIY SUITCASE PARTS 3D Printer Model' is (stl) file type, size is 3.2MB.
These are parts for making your own suitcase. :-)
There are two kinds of handles (big and small).
You can choose 4 different kinds of corner protectors.
Also there are 4 closures available.
See print screen for more information
For the closure you need an M4x40mm bolt, M4x20mm bolt &2 M4 nuts
For the handle you need 2X M6x40mm & 2x M6 nuts
For the hinge you need an M4 x 65mm bolt & m4 nut
You do not need support material for printing,
but for one of the corners it may be necessary depending of the orientation on the bed of the printer.
See print screen of cura.
If you think I have missed a part that’s necessary, please let me know. :-)
Printed in PET-G resolution 0.2mm
| closureA1.stl | 1.5MB | |
| closureA2.stl | 93.8KB | |
| closureA3.stl | 116.6KB | |
| closureA4.stl | 1.6MB | |
| closureB2.stl | 94.0KB | |
| closureB3.stl | 746.8KB | |
| closureC1.stl | 91.9KB | |
| closureC2.stl | 69.0KB | |
| closureC3.stl | 100.2KB | |
| closureC4.stl | 82.1KB | |
| closureD2.stl | 68.8KB | |
| corner_filet.stl | 971.0KB | |
| corner_no_filet.stl | 598.7KB | |
| corner_plane_filet.stl | 914.7KB | |
| corner_plane_no_filet.stl | 541.7KB | |
| handle_big.stl | 6.1MB | |
| handle_hinge.stl | 3.8MB | |
| handle_small.stl | 1.3MB | |
| hinge1.stl | 1.1MB | |
| hinge2.stl | 1.2MB | |
| hinge_with_open_stop1.stl | 1.0MB | |
| hinge_with_open_stop2.stl | 1.1MB |
