DIY Rick And Morty Flying Car With LED Lights!! 3D Printer Model
The file 'DIY Rick And Morty Flying Car With LED Lights!! 3D Printer Model' is (stl,odp) file type, size is 57.7MB.
The file 'DIY Rick And Morty Flying Car With LED Lights!! 3D Printer Model' is (stl,odp) file type, size is 57.7MB.
If you like the Rick and Morty flying car with lights you may want to check out my Death Stranding Bike with Sam and LED lights!
https://cults3d.com/en/3d-model/art/death-stranding-sam-on-his-bike-with-led-lights
Or my Ecto-1 with Lights!!!
https://cults3d.com/en/3d-model/art/ecto-1-with-lights-and-sound-with-detailed-instruction
Check out the pictures for the tutorial. If you can't find the dome i used you can use another half sphere. Just test your dome first with dome_test.stl! You can scale the model if necessary then.
The finished car is about 9cm in height and the diameter is about 17cm.
Enjoy! :)
Edit 21.08.2019
Upgraded the Lights with an arduino and WS2812 LEDs.
https://www.youtube.com/watch?v=a1mGygE5pgc&feature=youtu.be
| bottles_trans.stl | 18.5MB | |
| details.stl | 507.6KB | |
| details_trans.stl | 2.0MB | |
| dome_ring.stl | 71.2KB | |
| dome_test.stl | 4.1MB | |
| interior.stl | 12.5MB | |
| led_holder.stl | 228.2KB | |
| morty.stl | 9.0MB | |
| rick.stl | 8.4MB | |
| saucer_bottom.stl | 15.6MB | |
| saucer_bottom_cap.stl | 1.5MB | |
| saucer_top.stl | 57.9MB | |
| seats.stl | 3.2MB | |
| stand.stl | 1.1MB | |
| stripes_trans.stl | 9.0MB | |
| trashcans.stl | 4.9MB | |
| trashcan_part_trans.stl | 567.3KB | |
| Verkabelung.odp | 23.6KB |
