Lab ATX PSU from my old PC power supply model TAKE ME 350 (350 W)
Part list:
To print the panels I used black Spectrum PETg with 3 perimeters, so in 1 mm thickness is enough to get a solid body.
You can use two options for the body, full cover and short.
I also created a variation of the front panel.
https://youtu.be/Hjjb_51QcBw
| PSU_back_full.stl | 668.6KB | |
| PSU_back_small.stl | 500.5KB | |
| PSU_front_v1.stl | 541.1KB | |
| PSU_front_v2.stl | 1.1MB |
