The file 'DIY PET Filament – PETamentor2 SS (upgraded By Matthieu) 3D Printer Model' is (stl,txt) file type, size is 4.7MB.
Last PETamentor2 SS upgrade by Matthieu Samson. (Thank you Matthieu:-))!
more at https://bit.ly/43OSEDo
if you can't acess website, please use a VPN
He brings to us a new realy beast puller wich is solving two general problems:
1) slipping pullers spool on the shaft during the filament pulling
2) Much more torque thanks to new 2:1 gearbox (stable revs at slower speeds, incredible powerful pull)
Cutter-Axes_Variables_-_Bottle_cutter_Mak3D.stl | 1.2MB | |
Cutter-Capot_moteur.stl | 471.7KB | |
Cutter-Coulisse.stl | 561.8KB | |
Cutter-Entretoise_6200zz_x2.stl | 52.0KB | |
Cutter-Grande_roue_V2.stl | 335.4KB | |
Cutter-Petite_roue_V2.stl | 216.2KB | |
Cutter-Screws_list_update_for_608zz.txt | 974.0B | |
Cutter_-_button_minus.stl | 119.0KB | |
Cutter_-_button_plus.stl | 120.6KB | |
Cutter_-_height_button_base.stl | 22.8KB | |
Cutter_-_MS_switch_bracket.stl | 30.9KB | |
Cutter_-_remote_pannet.stl | 63.4KB | |
On_OFF_switch.stl | 26.5KB | |
Platform_-_leg.stl | 68.3KB | |
Puller-Frame_Front.stl | 1.1MB | |
Puller-Frame_Rear.stl | 1.2MB | |
Puller-Gear_A_16_V2_Ondrej-coupler.stl | 991.5KB | |
Puller-Gear_B_countersunk_32.stl | 1.9MB | |
Puller-Gear_B_Hex_32.stl | 1.8MB | |
Puller-Gear_C_countersunk_28-16.stl | 1.6MB | |
Puller-Gear_C_Hex_28-16.stl | 1.5MB | |
Puller-Spacer_for_B.stl | 163.4KB | |
Puller-Spacer_for_C.stl | 213.4KB | |
Puller_-_spool.stl | 56.9KB | |
Puller_-_spool_front.stl | 50.5KB | |
Thermocontrolletr-SS.stl | 1.1MB | |
Wire_hook_-_cable_management.stl | 25.9KB |