I needed to test some lens setups for a DIY monochromator that I've been working on, and designed this mini optics setup to help me. The lenses I sourced were out of a thrift store slide projector from the 60's, and the lens mounts were designed around those. Can print multiple base plates and snap them together to make longer rails.
I'm very much a novice with 3D modeling so I can't speak to the editability of my design, but should be relatively simple to adjust parameters to fit any lens. Mounts and lenses are held in place using M5 nuts/screws.
| Base_Plate.stl | 11.8KB | |
| Biconvex_Mount_Bottom.stl | 38.0KB | |
| Biconvex_Mount_Top.stl | 26.4KB | |
| Diffraction_Grating_Mount.stl | 13.3KB | |
| LED_Mount.stl | 56.7KB | |
| Light_Source_Mount.stl | 69.4KB | |
| Optical_Slit_Mount.stl | 23.9KB | |
| Optical_Slit_Slide.stl | 13.9KB | |
| Parabolic_Mirror_Mount.stl | 90.5KB | |
| Plano-Convex_Mount.stl | 92.4KB |
