Please refer to the video for instructions: https://www.youtube.com/watch?v=PhLFmokgr9o
Note: the 1/8 in version is still a work in progress, so things might not fit correctly.
ABS or PETG is recommended, but PLA also works.
print the base at 3 walls, 30% infill, and the lid as solid.
layer height: 0.2mm
The labels are printed at 0.2mm layer height with a filament swap during the process.
| 10A_rocker_switch.SLDPRT | 120.6KB | |
| 110_and_220_to_36v_5A_converter.SLDPRT | 211.2KB | |
| 80x10mm_fan.SLDPRT | 134.7KB | |
| back_pannel.PDF | 65.1KB | |
| back_pannel.SLDDRW | 244.4KB | |
| back_pannel.SLDPRT | 197.3KB | |
| Banana_connector_female_Black.SLDPRT | 225.1KB | |
| Banana_connector_female_RED.SLDPRT | 224.4KB | |
| Bottom_pannel.SLDPRT | 96.0KB | |
| Cable_clamp.SLDPRT | 108.7KB | |
| Cable_lock.SLDPRT | 94.7KB | |
| Cable_lock.STL | 47.3KB | |
| Cable_stablizer.SLDPRT | 102.6KB | |
| Cable_stablizer.STL | 27.8KB | |
| DC_Jack.SLDPRT | 69.6KB | |
| eighth_in_version_assembly.SLDASM | 323.3KB | |
| Fan_ring.SLDPRT | 69.7KB | |
| Fan_ring.STL | 40.3KB | |
| front_inscription.SLDPRT | 210.2KB | |
| front_inscription.STL | 109.3KB | |
| Front_pannel_IO_Shield.SLDPRT | 97.7KB | |
| Full_Power_supply_assembly.SLDASM | 1.1MB | |
| Full_Power_supply_assembly_-_Cable_clamp-1.STL | 33.6KB | |
| Full_Power_supply_assembly_-_Cable_clamp-2.STL | 33.6KB | |
| Full_Power_supply_assembly_-_Power_supply_Base-1.STL | 234.4KB | |
| Full_Power_supply_assembly_-_Power_supply_lid-1.STL | 1.1MB | |
| Inscription_side.SLDPRT | 173.2KB | |
| Inscription_side.STL | 56.7KB | |
| Left_pannel.SLDPRT | 169.9KB | |
| LM2596_DC_step_down_converter.SLDPRT | 124.0KB | |
| Perfrations.STL | 4.2MB | |
| Power_supply_Base.SLDPRT | 295.8KB | |
| Power_supply_lid.SLDPRT | 1.0MB | |
| Right_pannel.SLDPRT | 159.4KB | |
| Rubber_feet.SLDPRT | 63.4KB | |
| Screw_terminal.SLDPRT | 124.5KB | |
| side_skirts.SLDPRT | 99.1KB | |
| side_skirts.STL | 81.5KB | |
| Step_down_converter_constant_current_module.SLDPRT | 178.0KB | |
| Switch.SLDPRT | 103.8KB | |
| Top_pannel.SLDPRT | 226.8KB | |
| USB_type-A_female_chassis.SLDPRT | 891.8KB | |
| XT60_female.SLDPRT | 510.3KB | |
| XT60_male.SLDPRT | 508.9KB |
