remix with some reworks
minimum printed
BOM
1x M8 x 100 or threaded rod
2x M8 x 80
7x M8 nuts
1x M8 wingnut can be printed
5x M8 washers can be printed
4x M3 x 10
2x M3 x 20
8x M3 washers
6x M3 nuts
motor with drill bit holder
wires, PSU and switch
| arm_knob.scad | 662.0B | |
| arm_knob.stl | 460.3KB | |
| arm_mount.scad | 1.5KB | |
| arm_mount.stl | 151.8KB | |
| drill_base_smuk.scad | 3.0KB | |
| drill_base_smuk.stl | 194.7KB | |
| drill_press_assembly.scad | 2.0KB | |
| Drill_Press_Clamp.STL | 18.4KB | |
| fixed_slide.scad | 2.3KB | |
| fixed_slide.stl | 303.0KB | |
| functions.scad | 4.1KB | |
| PalomillaM8_R2.stl | 122.0KB | |
| publicDomainGearV1.1.scad | 10.5KB | |
| rack_gear_mod.scad | 729.0B | |
| rack_gear_mod.stl | 203.6KB | |
| rotacraft_rc18_drill_body_mount.scad | 2.2KB | |
| rotacraft_rc18_drill_body_mount.stl | 214.6KB | |
| rotacraft_rc18_drill_collar_mount.scad | 2.2KB | |
| rotacraft_rc18_drill_collar_mount.stl | 212.0KB | |
| sliding_wedge_rack_mod.scad | 1.3KB | |
| sliding_wedge_rack_mod.stl | 671.8KB | |
| washer_1_x_8.5.stl | 126.4KB |
