DIY LED Panel 3D Printer Model
The file 'DIY LED Panel 3D Printer Model' is (stl,f3d,step) file type, size is 3.6MB.
The file 'DIY LED Panel 3D Printer Model' is (stl,f3d,step) file type, size is 3.6MB.
To learn more check out my video about LED Panels: https://youtu.be/9il2ZOaiGGw
Hi everyone!
This is my project of a compact DIY Led Panel that can be printed
as one piece on any 220x220 printer bed. I decided to make it because
I lacked enough light sources for making my videos.
Now I use this panel every time I need to record something and
even though it consumes just 25W it is just as bright if not
brighter than my 85W softbox lamp.To build it you will need
just a thin piece of steel and some LED strips so the total cost
is pretty low for such a bright light source.
For my panel I used
-1x 5m LED SMD5630 spool ( I used just 9-20cm strips so the total length is 1.8m, but I don't think you can get smaller spools. You can stick more strips but keep in mind that it will generate more heat as well)
-1x 180x200mm thin steel sheet (Download .STEP file for more precise dimensions)
-Some electric wires and power switch
-Some M3 screws
-3D Printed Case ( I used White PETG)
If you want you can also add a PlexiGlass panel with the cover or print a tripod adapter. For more details check out my video about LED Panels
| Case.stl | 4.1MB | |
| DIY_Led_Panel.f3d | 2.8MB | |
| DIY_Led_Panel.step | 3.2MB | |
| Plexi_Cover.stl | 1.4MB | |
| Tripod_Mount.stl | 1.6MB |
