A camera stand which bolts on a table edge for taking photos vertically.
General notes: the three holes in 'ArmAngleToCamera.stl' and 'ArmAngleToDesk.stl' need to be tapped with an M4 tap. 'MainAngle.stl' is printed twice and both are glued on stainless steel tubing (25mm OD). Some parts will need to be tapped with M8 threading. M6 bolt is used to bolt on a camera to the stand. 'MainAngle.stl' has a lot of 4mm holes - they are used to lock the stand's arm in place. The arm can be moved in 5 degrees increments.
More information and photos of the project at: https://daumemo.com/diy-camera-desk-stand/
My other projects: daumemo/designs
Dremel Drill Press
USB-Serial isolated adapter
4 Channel Led Strip Wi-Fi Enabled Controller
AVR pogo ISP addon
| ArmAngleToCamera.STL | 232.7KB | |
| ArmAngleToMain.STL | 248.9KB | |
| CameraMount.STL | 36.6KB | |
| MainAngle.STL | 328.0KB | |
| MainDeskPart.STL | 27.2KB |
