DIY 5.1 Amplifier 3D Printer Model
The file 'DIY 5.1 Amplifier 3D Printer Model' is (stl) file type, size is 949.0KB.
The file 'DIY 5.1 Amplifier 3D Printer Model' is (stl) file type, size is 949.0KB.
Hello everyone,
I found an affordable speakers set for a 5.1 sound system and decided to build the amplifier myself. 🛠️
With three stereo amplifiers that I found for less than €20, you can cover all 6 channels needed for a 5.1 sound system.
I also 3D printed a housing for it and installed everything inside. It works great, just had to use Ground Loop Isolators on all audio inputs to avoid any humming in the speakers.
If you want more details about it, I made a YouTube video: https://www.youtube.com/watch?v=0Mgx2k_e6QM
Other things I used:
Stereo amplifier: https://ebay.us/9usd7l
Ground loop isolators:
from DE: https://ebay.us/OlrPvg
from China: https://ebay.us/DsLXi0
Matching power supplies:
https://ebay.us/ZLu8AQ
https://ebay.us/OaDsWi
If you click on links to various merchants in this description and make a purchase, this may result in me receiving a small commission. The affiliate programmes include the eBay Partner Network
| Cover.stl | 348.8KB | |
| Enclosure.stl | 3.1MB | |
| Ventilation_holes.stl | 552.8KB |
