DIY 3D Printed Arc Reactor – Super Make Something Episode 15 3D Printer Model
The file 'DIY 3D Printed Arc Reactor – Super Make Something Episode 15 3D Printer Model' is (STL) file type, size is 556.6KB.
The file 'DIY 3D Printed Arc Reactor – Super Make Something Episode 15 3D Printer Model' is (STL) file type, size is 556.6KB.
STL files to make your own screen-accurate 3D printed arc reactor as featured in Super Make Something Episode 15!
You will need to print the following part quantities:
1x PM-1001 Diffusion Ring
10x PM-1002 Coil Spacer
1x PM-1003 Center Ring
1x PM-1004 Concentric Rings
1x PM-1005 Chest Harness
The Diffusion Ring should be printed at 100% infill to avoid a grid pattern shining through when the prop is lit by the LEDs. All parts should be printed with raft and support to make sure that their bottom surfaces are flat.
Want more information on how to build your own? Check out the build video below! The video description at the link also contains a complete bill of materials and list of tools you will need to build your own screen-accurate Iron Man arc reactor: https://youtu.be/QTlXr9m182c
Like this project and want to support Super Make Something? You can buy me a coffee here: https://www.buymeacoffee.com/SuperMakeSmthng
| PM-1001_-_Diffusion_Ring.STL | 454.9KB | |
| PM-1002_-_Coil_Spacer.STL | 13.4KB | |
| PM-1003_-_Center_Ring.STL | 519.0KB | |
| PM-1004_-_Concentric_Rings.STL | 95.8KB | |
| PM-1005_-_Chest_Harness.STL | 516.7KB |
