This design is heavily dependent on the parts you bought. I designed this based on my parts. If you wish to see where I got them, go to https://www.youtube.com/watch?v=7bmABK2ro4I&t=623s and watch the video and check the description.
For Printing I recommend ABS, and use nylon for the sides for impact resistance.
Resolution can be 0.2mm
| back_plate.stl | 35.4KB | |
| bottom_cover_small.stl | 103.9KB | |
| Electronics_Assembly_final_rev.stl | 286.1KB | |
| fount_pannel_cover.stl | 82.8KB | |
| IO_Shield.stl | 184.5KB | |
| Side_pannel_Fan_IN.stl | 222.2KB | |
| Side_pannel_fan_out.stl | 230.0KB | |
| top_plate.stl | 150.8KB | |
| tuning_knob.stl | 110.5KB |
