Display Stand & Screws/pins For Rey Blaster By Flannery42 3D Printer Model
The file 'Display Stand & Screws/pins For Rey Blaster By Flannery42 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Display Stand & Screws/pins For Rey Blaster By Flannery42 3D Printer Model' is (stl) file type, size is 1.7MB.
Here's a stand for the very nice LPA NN-14 Blaster designed by Flannery42.
Also included the screws I made to replace the metal ones intended in the instructions. They are tiny so use plenty of supports and brim and go slower if you have to. They are meant more as cosmetic parts as they don't actually screw or secure anything, but are long enough to be useful for alignment if you're just gluing it all together like I did. The trigger pin should be printed laying down to keep it from breaking when used. The rectangular connector is optional but again might be useful for alignment and better structural support.
| All_Screws_full_bed.stl | 3.5MB | |
| Back_plate_to_handle_connector.stl | 1.8KB | |
| Rey_Blaster_stand_Base.stl | 101.3KB | |
| Rey_Blaster_stand_legs.stl | 46.4KB | |
| Rey_Blaster_stand_TAG.stl | 559.5KB | |
| Screw_large_x4.stl | 95.8KB | |
| Screw_medium_x27.stl | 95.8KB | |
| Screw_small_x6.stl | 95.8KB | |
| Trigger_pin.stl | 10.2KB |
