A display stand in regular and low-riser versions.
Very versatile stand that can be printed out in any size you need! Small for displaying CDs, or large for pictures, books, etc..
This prints surprisingly fast! I print with a .6mm nozzle, at .4mm resolution. So, each side will take about 45 minutes. A case where it's faster to print and put together than running out the door to buy something similar!
It comes in 2 pieces which slide together, so it may need a bit of filling. Otherwise, no glue needed!
Also, this may be slightly larger than your print bed. I scale both pieces down, because the end goal is a versatile piece that you change the size in the slicer to fit your needs.
Depending on the weight and size, vary the infill for the end product! 20% seems to create a solid piece.
Use the low riser version if you need to display an object that has more height.
If you can think of other variations and needs, let me know and I can try to modify the piece to adapt it to other needs. I'd love to create a useful, fast to print piece that everyone can download and use.
Edit: Added new photos. The first version I printed was rough, but it was a test. One of the few instances an idea and 3D model comes out exactly as you wanted, printed, and intended, on the first try. A little rough, but fully functional.
New pics are of a small regular riser stand and the larger version features the low-riser version.
| Art_Stand_left_.stl | 7.5KB | |
| Art_Stand_left_LOW_RISER_.stl | 7.5KB | |
| Art_Stand_right_.stl | 6.3KB | |
| Art_Stand_right_LOW_RISER_.stl | 6.3KB |
