I made a modified version of the control and display cover for the Vsett 10 electric scooter. The original version is here: https://www.thingiverse.com/thing:5483475
The sun cover is now attached using M3x12mm screws + nuts. Furthermore, the overall attachment for M4 screws is modified. In the original version, the bottom of the holes could break when the screws were tightened too much.
Buttons must be printed from TPE or TPU material to ensure functionality. Print the upper part of the shade with a layer height of 0.1 - 0.12 mm without supports.
| Kryt_ovládánÃ.stl | 1.0MB | |
| Kryt_ovládánÃ_verze_2.pdf | 934.2KB | |
| Kryt_voltmetru.stl | 145.8KB | |
| Ramecek.stl | 119.3KB | |
| Ramecek_tlacitek.stl | 165.0KB | |
| StÃnÃtko.stl | 724.6KB | |
| Tlacitka.stl | 81.7KB |
