DISPLAY CASE/STAND for SHARP 7inch 1920x1200 IGZO LCD kit.
Please refer to readme_049rv3.pdf for assembling.
-Requirement
SHARP 7inch 1920x1200 IGZO LCD display kit
http://akizukidenshi.com/catalog/g/gM-10016/
https://www.switch-science.com/catalog/2565/
https://raspberry-pi.ksyic.com/main/index/pdp.id/112
http://eleshop.jp/shop/g/gFCI311/
M3x12mm Plastic Bolt&Nut
http://akizukidenshi.com/catalog/g/gP-02743/
or Similar product
Qty; 4 pairs
M3 Plastic Joint 10mm spacer bolt&Nut
http://akizukidenshi.com/catalog/g/gP-01864/
or Similar product
Qty; 4pairs and 2pcs of Nut.
-Optional item
M3x8or10mm Metal screw
Qty; 2pcs.
-Please re-make, re-design or revise.
A CAD file for AUTODESK 123D DESIGN is "CaseIGZ_049rv3.123dx"
[Revised; 12/19/2015]
1/2/2016_<updated;"LCD_FCVR">
I received the opinion and advice of the following.
-"LCD_FCVR_049rv2" is difficult to mounting , and it seems fragile.
-The reason for this might be differences depending on the kind of PLA filament,
It might be better to be a little more easily installed.
This opinion should not be denied.
I've uploaded new "LCD_FCVR" that reflect their opinions and advice.
LCD_FCVR_049rv3_3.123dx
LCD_FCVR_049rv3_3.stl
If you feel the mounting of "LCD_FCVR_049rv2" is difficult or fragile, please try "LCD_FCVR_049rv3_3".
Or, if you have a another better idea, please try it.
| ARM_L_049.stl | 689.0KB | |
| ARM_R_049.stl | 688.5KB | |
| BKPNL_049rv2.stl | 311.9KB | |
| CaseIGZ_049rv3.123dx | 1.2MB | |
| FLXCVR_049rv3.stl | 785.8KB | |
| LCD_BASE_049_.stl | 121.3KB | |
| LCD_FCVR_049rv2.stl | 1.1MB | |
| LCD_FCVR_049rv3_3.123dx | 188.3KB | |
| LCD_FCVR_049rv3_3.stl | 1.3MB | |
| LEG_L_049.stl | 561.1KB | |
| LEG_R_049.stl | 560.4KB | |
| PVT_049_.stl | 59.9KB | |
| readme_049rv3.pdf | 4.1MB | |
| SDCVR_049rv3.stl | 679.1KB | |
| SPACER_049.stl | 198.2KB |
