Dispenser For Syringe Of Flux Or Solder Paste 3D Printer Model
The file 'Dispenser For Syringe Of Flux Or Solder Paste 3D Printer Model' is (stl) file type, size is 761.09 KB.
The file 'Dispenser For Syringe Of Flux Or Solder Paste 3D Printer Model' is (stl) file type, size is 761.09 KB.
UPD 2022: Now it's time to share ) reinforced big lever, main body with magnets (6x3 like in Voron printer), amazing flux stand where it all stay on the needle and do not flow out after use, it has good stability even without magnets and steel stand :)
ps. i recommend to use main with 1 bottom magnet, 2 magnets are too strong)
I got tired of squeezing the flux out of the syringe with my thumb and so I decided to create this thing to squeeze the flux out with my index finger. All other things are in the shape of a pistol, which I did not like and these will take up a lot of space on the table.
This dispenser is compact and can be placed vertically or in a special stand similar to a soldering iron stand.
Everything is printed without support. I used PLA but I think any material that is strong in bending will do.
Use an M3x25 as an axle for attaching the large arm and a piece of filament (1.75mm) as an axle for attaching the small.
This dispenser was designed for a 19.5mm syringe, but it will also work for a 14.5mm syringe, just print another plunger. This plunger will also fit large syringes so only this can be printed.
| dispenser-big-lever-reinforced_2022.stl |
| dispenser-big-lever.stl |
| dispenser-main-2magnets_2022.stl |
| dispenser-main-magnet_2022.stl |
| dispenser-main.stl |
| dispenser-piston-3mm-for-small-syringe_v3.stl |
| dispenser-piston-3mm.stl |
| dispenser-small-lever.stl |
| flux_stand_2022.stl |
