Dispense Needle Bender 1inch 25mm 3D Printer Model
The file 'Dispense Needle Bender 1inch 25mm 3D Printer Model' is (stl) file type, size is 400.3KB.
The file 'Dispense Needle Bender 1inch 25mm 3D Printer Model' is (stl) file type, size is 400.3KB.
Hi,
this is an hand tool to bend dispense needles and a remix of the 4mm tube bender from "lembasbrot"
--> https://www.thingiverse.com/thing:2826538
Dispense Needle Bender / suits for green Nozzle with outer diameter of around 1,3mm and length of 25mm.
for example
dispensing tip standard 1 inch (50 pieces) / interior Ø 0,84 mm, gauge 18, green
Art. Nr.: 508185 / Product ID: F560087-1
https://dosieren.de/en/products/dispensing-tips/standard/508185/dispensing-tip-standard-1-inch-50-pieces
hole size: 2,0mm
Radius: 7mm
Maximum bend: 180° / in my case used for 90°
The center guide is split in half because this results in a more symmetric finish when printed. I suggest printing this part at lower layer height (I used 0,07mm / obviously you'll need two).
Hardware:
2x M4x20 bolts (handles)
1x M4x20 bolt (center)
| bdr_h2_r7_v6_center-cut.stl | 438.9KB | |
| bdr_h2_r7_v6_part1.stl | 513.8KB | |
| bdr_h2_r7_v6_part2.stl | 334.5KB |
