Dispense Needle Bender 1 1/2 Inch 38mm 3D Printer Model
The file 'Dispense Needle Bender 1 1/2 Inch 38mm 3D Printer Model' is (stl) file type, size is 187.1KB.
The file 'Dispense Needle Bender 1 1/2 Inch 38mm 3D Printer Model' is (stl) file type, size is 187.1KB.
Hi,
this is an hand tool to bend dispense needles and a remix of the 4mm tube bender from "lembasbrot"
--> https://www.thingiverse.com/thing:2826538
Dispense Needle Bender / suits for green Nozzle with outer diameter of around 1,3mm and length of 38mm.
for example
dispensing tip standard 1 1/2 inch (50 pieces) / interior Ø 0,84 mm, gauge 18, green
Art. Nr.: 508186 / Product ID: F560087-1_5
https://dosieren.de/en/products/dispensing-tips/standard/508186/dispensing-tip-standard-1-1-2-inch-50-pieces
hole size: 1,7mm
Radius: 10mm
Maximum bend: 180° / in my case used for 90°
The center guide is split in half because this results in a more symmetric finish when printed. I suggest printing this part at lower layer height (I used 0,07mm / obviously you'll need two).
Hardware:
2x M4x30 bolts (handles)
1x M4x20 bolt (center)
| BV_v3_center_cut.stl | 438.9KB | |
| BV_v3_part1.stl | 99.3KB | |
| BV_v3_part2.stl | 99.3KB |
