This is a set of display bases for Disney Infinity figures. My best friend got me into Infinity, now I have a need to display my collection in an organized way.
The models are as follows:
Row1: If you only have a few or want to put all of yours in a single, side-by-side row, print as many as you need except for:
Row1-end: This one caps of the first row so you don't have a connector hanging out
Row2: Same as Row1 except about 9mm higher so you can put them behind Row1 and still have them fully visible.
Row2-end: Same as Row1-end except higher for Row2
I recommend a higher infill percentage (20% works for me) if your printer has trouble anchoring strands on the slope. You can also try a lower infill and reorienting the model on the print bed. YMMV.
Originals are available on Tinkercad.
| infinity_baserow1-end.stl | 19.2KB | |
| infinity_baserow1.stl | 25.8KB | |
| infinity_baserow2-end.stl | 18.6KB | |
| infinity_baserow2.stl | 25.1KB |
