Dishwasher Status Slider, Magnetic 3D Printer Model
The file 'Dishwasher Status Slider, Magnetic 3D Printer Model' is (3mf,step,stl) file type, size is 134.8KB.
The file 'Dishwasher Status Slider, Magnetic 3D Printer Model' is (3mf,step,stl) file type, size is 134.8KB.
I made this slider to keep track of the status of the dishes inside of our dishwasher (green - clean | red - dirty). The model consists of 6 pieces and is assembled with magnets. There are 12 magnets in total. The colored squres are replaceable so you can change them anytime you want for other colors. The whole model is printed face down so that the all elemtens have the texture of the plate you are ptinting on.
This is my first ever model, I hope it will be usefeul for someone.
Instructions:
Push magnets into the slots on each of the 3 main pieces. Keep in mind the orientation of the magnets.
The color squares need to be place in the slit of piece #2 and snaped onto the piece #1.
Place the slider part into the slit of piece #3. This one is not a square so watch out for the orientation, Then snap that part to the rest of the pieces.
Filaments used:
Polyterra PLA Cotton White
Bambu Lab PLA Matte Scarlet Red (11200)
Bambu Lab PLA Matte Grass Green (11500)
Polyterra PLA Lavender Purple
Jayo PLA+ Black
Other parts:
Magnets, 6 mm x 2 mm - https://www.amazon.nl/-/en/dp/B09H34QS6C?ref=ppx_yo2ov_dt_b_fed_asin_title
| dishwasher_slider_v1.3mf | 104.2KB | |
| dishwasher_slider_v1.step | 102.0KB | |
| dishwasher_slider_v1.stl | 112.4KB |
