Semi automatic disc shooter - fully 3D printed - no extra parts or glue required.
See YouTube:
https://youtu.be/desvpfF1py8
Done as an engineering challenge and to show what can be done with 100% printed things, its also a lot of fun. Last part of a series of shooting things.
Settings:
All done with 0.2mm layer and grid infill.
Plate1: 20% Infill - Support on build plate only, No brim - No raft
Plate2: 20% Infill - No supports - No brim - No raft
Plate3: 40% Infill - Supports everywhere - Brim - No raft
Plat4: 40% Infill - No supports - No brim - No raft
DSDiscPlate: 20% Infill - No supports - No brim - No raft
Note: If you have issues with the bolts fitting (all printers are different) you can resize Plate4 in your slicer and that should help.
This model is a development from my Mk3 disc shooter, but basically a new model as every single part (including screws) were all re-designed, so I didnt flag it as a remix (let me know if I should do).
| DSDiscPlate.stl | 4.3MB | |
| DSMk4CPlate1.stl | 3.8MB | |
| DSMk4CPlate2.stl | 8.2MB | |
| DSMk4CPlate3.stl | 846.4KB | |
| DSMk4CPlate4.stl | 24.3MB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
