Disc Gatling Gun
Fully 3D printed - no additional parts needed.
See videos
Short Video: https://youtu.be/zfnUmS575Ac
Full YouTube video including assembly: https://youtu.be/8bEYE92sotM
Note: This is a toy, but please use responsibly and never point at any person or any animal. We take no responsibility of any injury or damage.
Full model is made up of GatlingPrint1, GatlingPrint2, GatlingPrint3 and GatlingPrint4. The other files are spare or alternatives.
Part1 should be printed with 20% infill, Part2 20% infill and Build Plate supports, Part3 with 50% infill and Part4 with 50% infill and Build Plate Supports. These details are included in the filenames.
Note: Build Plate Supports refers to Prusa Slicer ‘Support On Build Plate Only’ option. If your slicer does not have such an option you may have more supports to remove on prints 2 and 4.
| Gatling7AlternativeMidSection.stl | 174.9KB | |
| Gatling7Spring.stl | 138.7KB | |
| GatlingDisc.stl | 543.1KB | |
| GatlingExtension.stl | 1.1MB | |
| GatlingPrint1_20percent.stl | 6.9MB | |
| GatlingPrint2_20percent_Support.stl | 1.5MB | |
| GatlingPrint3_50percent.stl | 40.0MB | |
| GatlingPrint4_50percent_Support.stl | 138.7KB |
