Dirty Simple Tricopter 3D Printer Model
The file 'Dirty Simple Tricopter 3D Printer Model' is (stl) file type, size is 243.8KB.
The file 'Dirty Simple Tricopter 3D Printer Model' is (stl) file type, size is 243.8KB.
A super simple T-copter that is flexible to your needs. Want a big AP rig, look no further, a 5in racer, no problem. Just cut different length booms to fit your prop size. the boons are half inch square dowels that I cut (20in for the front, 20in for the rear) and spray painted.
Printed parts:
2X MotorMount
2X MainFrame
3X LandingGear
1-3X FCMount
1X RXMount
1X TiltBack
1X TiltBody
1X ServoSpacer
Other parts:
8X 20mm M3 Bolt
8X M3 Lock Nut
4X 2mmD X7mmL screw (for mounting FC)
4mm Brass Tubing(10mm)
1X NMB R-1140zz
Zip ties
Electronics:
T-Motor 2212:
http://store-en.tmotor.com/goods.php?id=388
20A 4-in-1 ESC:
http://www.readytoflyquads.com/20a-d-shot-detonator-4in1-esc-blheli-s-muiltshot
Flight Controller:
https://www.getfpv.com/lumenier-lux-v2-flight-controller.html
Servo:
Reciever:
https://www.frsky-rc.com/product/xsr/
Battery:
https://www.amazon.com/Tattu-Battery-1550mAh-14-8V-Airplane/dp/B01FFD98AE
| FCMount.stl | 239.7KB | |
| FCMount2.stl | 205.6KB | |
| LandingGear.stl | 98.2KB | |
| MainFrame.stl | 95.6KB | |
| MotorMount.stl | 87.4KB | |
| RXMount2.stl | 59.1KB | |
| ServoSpacer.stl | 684.0B | |
| TiltBack.stl | 162.5KB | |
| TiltBody.stl | 109.3KB |
