It is not the best clock, but it is my clock.
Just to see if I can do it.
The clockwork is from an IKEA STOMMA.
To put it together, I used 4 pc M2 12mm screws and superglue for the clockwork holder. This way, everything prints without supports.
The one on the pictures is a slightly older model, as I implemented the things I learned from my mistakes, but used everything that was usable.
I really appreciate every feedback, as this is a learning project for me.
| body.3mf | 114.4KB | |
| body.stl | 104.8KB | |
| face.3mf | 138.7KB | |
| face.stl | 54.0KB | |
| holder.3mf | 57.1KB | |
| holder.stl | 11.0KB | |
| inner_ring.3mf | 63.1KB | |
| inner_ring.stl | 54.0KB | |
| ring.3mf | 64.1KB | |
| ring.stl | 62.6KB |
