Direct Mod BMG + E3Dv6 For Openbuilds Carriage (Creality, Tevo, Alfawise, Etc) 3D Printer Model
The file 'Direct Mod BMG + E3Dv6 For Openbuilds Carriage (Creality, Tevo, Alfawise, Etc) 3D Printer Model' is (stl,step) file type, size is 549.8KB.
The file 'Direct Mod BMG + E3Dv6 For Openbuilds Carriage (Creality, Tevo, Alfawise, Etc) 3D Printer Model' is (stl,step) file type, size is 549.8KB.
Once I noticed, that only 5015 blower isn't enough for my minis printed of PET-G and PLA, So I designed a mount for BMG + E3Dv6 direct config, where I can mount two 5015 radial blowers on both sides. For harder to melt materials, like ABS, you may use less RPM for the same result as with high RPM on single 5015. As I am using 3DTouch autoleveling sensor, I made a mount for it too.
As you want to do some edits and change something in my model, I added a source .step source.
Enjoy, post makes and remixes!
List of parts: E3Dv6 hotend; dual drive BMG extruder; NEMA17 slim motor; 4010 or 4020 fan; 2x 5015 radial fan. Also mount is compatible with e3d volcano because of moving 5015 fans and atolevelling sensor in a big range.
The BLTouch offset is 45 ; 16
| BL_mount.stl | 124.6KB | |
| carriage_mount.stl | 237.5KB | |
| direct_mode.step | 1.2MB | |
| fan_bracket_left.stl | 66.7KB | |
| fan_bracket_right.stl | 66.7KB | |
| left_duct.stl | 52.1KB | |
| motor_mount.stl | 507.8KB | |
| right_duct.stl | 56.8KB |
![[Remix] CR-10 Fan Mod 3D Printer Model](https://cdn.3axis.co/assets/01/3c/80/39/013c8039-4123-4419-8d92-a6c862619f7d/images/b659cf07-c59d-42a4-8477-f6128dc40c99_thumb.jpg)
