Diode Laser Air Assist System 3D Printer Model
The file 'Diode Laser Air Assist System 3D Printer Model' is (STL,DXF) file type, size is 1.1MB.
The file 'Diode Laser Air Assist System 3D Printer Model' is (STL,DXF) file type, size is 1.1MB.
Diode Laser Air Assist System
The clip system is for laser heads with 40x40mm heat sinks
for Fixing the Clips 4 magnets with 5x5x2 and as a seal 36/28mm with the laser cut a foam rubber mat with a height of 2.4mm
Hose 6/4
Airasistholder-V2-40x40;
Add Second Seal on the Top
If other variables are needed just write me
I use an aquarium air pump with 250 l / h
Enjoy an Like
Important Information:
The lower opening should be MIN 1mm or MAX 2mm away from the surface of the object to be cut or engraved.
Otherwise the laser beam is too wide and burns into the 1.5mm opening from the air nozzle.
Magnets:
https://www.amazon.de/gp/product/B07DYX6TKB/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Foamrubber mat:
https://toom.de/p/antirutsch-pad-selbstklebend-schwarz-100-x-100-mm/7550173
| 20mmclip.STL | 292.7KB | |
| 30mmclip.STL | 277.3KB | |
| 40mmclip.STL | 254.7KB | |
| 50mmclip.STL | 248.5KB | |
| Airasistholder-V2-40x40.STL | 717.9KB | |
| Airassistholder-40x40.STL | 542.7KB | |
| FocusRing.STL | 513.9KB | |
| Laserbock-30-2.5.STL | 159.8KB | |
| Laserbock-30-3.STL | 153.5KB | |
| Laserbock-30-4.STL | 132.7KB | |
| Laserbock30-1.8.STL | 162.7KB | |
| Laser_underlay.STL | 16.7KB | |
| Sealing-V2.DXF | 21.7KB | |
| Sealing.DXF | 21.6KB |
![Y-axis Linear Bearing [624zz] 3D Printer Model](https://cdn.3axis.co/assets/cd/d0/ee/4a/cdd0ee4a-b50d-4de1-9f6c-a974d3522136/images/b42d89b3-ef6a-4bba-b236-7f5a20f5d98d_thumb.jpg)
