The file 'Dino X-Ray 3D Printer Model' is (HEIC,3mf,stl,gcode) file type, size is 48.6MB.
An x-ray of a dinosaur.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.8
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 10
PLA BambuLab Basic Jade White Transmission Distance: 3
Swap Instructions:
Start with Charcoal
At layer #3 (0.72mm) swap to Slate Gray Sparkle
At layer #5 (1.12mm) swap to Ash Gray
At layer #8 (1.72mm) swap to Jade White for the rest.
Happy printing!
| Dino_X-Ray.HEIC | 1.4MB | |
| Dino_X-Ray_by_TheMazePrinter.3mf | 24.4MB | |
| Dino_X-Ray_by_TheMazePrinter.stl | 106.3MB | |
| Dino_X-Ray_by_TheMazePrinter_Front_200x200_PLA_2h1m.gcode | 12.8MB |
