DIN Rail Mount For Teltonika 3D Printer Model
The file 'DIN Rail Mount For Teltonika 3D Printer Model' is (stl) file type, size is 21.1KB.
The file 'DIN Rail Mount For Teltonika 3D Printer Model' is (stl) file type, size is 21.1KB.
Very slim 35 mm DIN rail mounting kit for that should work with most of the different mobile networking router/gateway from Teltonika.
The mount is designed for the 35×7.5 mm or 35×15 mm top-hat rail as per IEC/EN 60715, EN 50022, BS 5584, DIN 46277-3, or AS 2756-1997.
Used for mounting a TRB500 in a RP1455 case from Hammond.
Two M3x6 screws and spacers are needed to fasten the mount the the unit.
Note: The layer orientation of the mount part can affect the smooth operation of the locking mechanism. Therefore, consider the orientation when slicing. Recommended orientation is that the 35 mm DIN rail cutout is facing the bed.
| DIN_Rail_Mount_Teltonika.stl | 29.0KB | |
| Mount_Lock_245_mm.stl | 58.2KB |
